is now available! Read about the new features and fixes from September.

Configuring C# debugging

You can configure the C# debugger in Visual Studio Code with a launch.json, launchSettings.json, or your user settings.json file.

Below are common options you may want to change while debugging.

Configuring VS Code's debugging behavior

PreLaunchTask

The preLaunchTask field runs the associated taskName in tasks.json before debugging your program. You can get the default build prelaunch task by executing the command Tasks: Configure Tasks Runner from the VS Code Command Palette.

This creates a task that runs dotnet build. You can read more in the VS Code Tasks documentation.

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json

Program

The program field is set to the path of the application dll or .NET Core host executable to launch.

This property normally takes the form: "${workspaceFolder}/bin/Debug/<target-framework>/<project-name.dll>".

Example: "${workspaceFolder}/bin/Debug/netcoreapp1.1/MyProject.dll"

Where:

  • <target-framework> is the framework that the debugged project is being built for. This is normally found in the project file as the 'TargetFramework' property.
  • <project-name.dll> is the name of debugged project's build output dll. This is normally the same as the project file name but with a '.dll' extension.

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json ✔️ as executablePath

Cwd

The working directory of the target process.

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json ✔️ as workingDirectory

Args

These are the arguments that will be passed to your program.

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json ✔️ as commandLineArgs

Stop at Entry

If you need to stop at the entry point of the target, you can optionally set stopAtEntry to be "true".

Availability

  • launch.json ✔️
  • settings.json ✔️ as csharp.debug.stopAtEntry
  • launchSettings.json

Starting a Web Browser

The default launch.json template (as of C# extension v1.20.0) for ASP.NET Core projects uses the following to configure VS Code to launch a web browser when ASP.NET starts:

    "serverReadyAction": {
        "action": "openExternally",
        "pattern": "\\bNow listening on:\\s+(https?://\\S+)"
    }

Notes about this:

  1. If you do NOT want the browser to automatically start, you can just delete this element (and a launchBrowser element if your launch.json has that instead).

  2. This pattern launches the web browser using the URL that ASP.NET Core writes to the console. If you want to modify the URL see specifying the browser's URL. This may be useful if the target application is running on another machine or container, or if applicationUrl has a special host name (example: "applicationUrl": "http://*:1234/").

  3. serverReadyAction is a new feature from VS Code. It is recommended over the previouslaunchBrowser feature that is built into the C# extension's debugger as it can work when the C# extension is running on a remote machine, it uses the default browser configured for VS Code, and it also allows using a script debugger. You can continue using launchBrowser instead if none of those features are important to you. You also can continue to use launchBrowser if you want to run a specific program instead of starting the default browser.

  4. More documentation for serverReadyAction can be found in the Visual Studio Code February 2019 release notes.

  5. The way this works is that VS Code scrapes the output that is set to the console. If a line matches the pattern, it launches a browser against the URL that was 'captured' by the pattern.

    Here is an explanation of what the pattern does:

    • \\b : Matches on a word boundary. Note that \b indicates a word boundary, but because this is in a json string, the \ needs to be escaped, hence \\b.
    • Now listening on: : This is a string literal, meaning that the next text must be Now listening on:.
    • \\s+ : Matches one or more space characters.
    • ( : This is the beginning of a 'capture group'. This indicates the region of text to be saved and used to launch the browser.
    • http : String literal.
    • s? : Either the character s or nothing.
    • :// : String literal.
    • \\S+ : One or more nonwhitespace characters.
    • ) : The end of the capture group.
  6. Both forms of browser launch require "console": "internalConsole", as the browser launcher scrapes the standard output of the target process to know when the web server has initialized itself.

Specifying the browser's URL

If you want to ignore the URL from the console output, you can remove the ( and ) from the pattern, and the set uriFormat to what you want to launch.

Example:

    "serverReadyAction": {
        "action": "openExternally",
        "pattern": "\\bNow listening on:\\s+https?://\\S",
        "uriFormat": "http://localhost:1234"
    }

If you want to use the port number from the console output, but not the host name, you can also use something like this:

    "serverReadyAction": {
        "action": "openExternally",
        "pattern": "\\bNow listening on:\\s+http://\\S+:([0-9]+)",
        "uriFormat": "http://localhost:%s"
    }

In fact, you can open almost any url, for example you could open the default swagger ui by doing something like this:

    "serverReadyAction": {
        "action": "openExternally",
        "pattern": "\\bNow listening on:\\s+http://\\S+:([0-9]+)",
        "uriFormat": "http://localhost:%s/swagger/index.html"
    }

Note You need to make sure your project has swaggerui setup to do this.

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json ✔️ with launchBrowser and applicationUrl

Environment variables

Environment variables may be passed to your program using this schema:

    "env": {
        "myVariableName":"theValueGoesHere"
    }

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json ✔️ as environmentVariables

Console (terminal) window

The "console" setting controls what console (terminal) window the target app is launched into. It can be set to any of these values --

  • "internalConsole" (default) : the target process's console input (stdin) and output (stdout/stderr) are routed through the VS Code Debug Console. The advantage of this mode is that it allows you to see messages from both the debugger and the target program in one place, so you will not miss important messages or need to switch back and forth. This is useful for programs with simple console interactions (example: using Console.WriteLine and/or Console.ReadLine). This should NOT be used when the target program needs full control over the console, such as a program that changes the cursor position, uses Console.ReadKey for input, etc. See below for instructions on inputting into the console.
  • "integratedTerminal" : the target process will run inside VS Code's integrated terminal. Select the Terminal tab in the tab group beneath the editor to interact with your application. When using this mode, by default, the Debug Console will not be shown when starting debugging. If using launch.json, this can be configured with internalConsoleOptions.
  • "externalTerminal": the target process will run inside its own external terminal. When using this mode, you will need to switch focus between Visual Studio Code and the external terminal window.

Inputting text into the target process when using internalConsole

When using internalConsole, you can input text into Visual Studio Code that will be returned from Console.ReadLine and similar APIs that read from stdin. To do so, while the program is running, type text into the input box at the bottom of the Debug Console. Pressing Enter will send the text to the target process. Note that if you enter text in this box while your program is stopped under the debugger, this text will be evaluated as a C# expression, not sent to the target process.

Example:

Example of inputting text to the Console to be set to the target process's standard input

Availability

  • launch.json ✔️
  • settings.json ✔️ as csharp.debug.console
  • launchSettings.json

launchSettings.json support

In addition to launch.json, launch options can be configured through a launchSettings.json file. The advantage of launchSettings.json is that it allows settings to be shared between Visual Studio Code, full Visual Studio, and dotnet run.

To configure which launchSettings.json profile to use (or to prevent it from being used), set the launchSettingsProfile option:

    "launchSettingsProfile": "ProfileNameGoesHere"

Which would then, for example, use myVariableName from this example launchSettings.json file:

{
  "profiles": {
    "ProfileNameGoesHere": {
      "commandName": "Project",
      "environmentVariables": {
        "myVariableName": "theValueGoesHere"
      }
    }
  }
}

If launchSettingsProfile is NOT specified, the first profile with "commandName": "Project" will be used.

If launchSettingsProfile is set to null/an empty string, then Properties/launchSettings.json will be ignored.

By default, the debugger will search for launchSettings.json in {cwd}/Properties/launchSettings.json. To customize this path, set launchSettingsFilePath:

   "launchSettingsFilePath": "${workspaceFolder}/<Relative-Path-To-Project-Directory/Properties/launchSettings.json"

Restrictions:

  1. Only profiles with "commandName": "Project" are supported.
  2. Only environmentVariables, applicationUrl and commandLineArgs properties are supported
  3. Settings in launch.json will take precedence over settings in launchSettings.json, so for example, if args is already set to something other than an empty string/array in launch.json then the launchSettings.json content will be ignored.

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json

Source File Map

You can optionally configure how source files are opened by providing a map using this form:

    "sourceFileMap": {
        "C:\\foo":"/home/me/foo"
    }

In this example:

  • C:\foo is the original location for one or more source files (example: program.cs) when a module (example: MyCode.dll) was compiled. It can either be a directory that has source files under it, or a complete path to a source file (example: c:\foo\program.cs). It doesn't need to exist either on the computer running Visual Studio Code, or if you are remote debugging, on the remote machine. The debugger reads the path to the source file from the .pdb (symbol) file, and transforms the path using this map.
  • /home/me/foo is the path where the source file can now be found by Visual Studio Code.

Availability

  • launch.json ✔️
  • settings.json ✔️ as csharp.debug.sourceFileMap
  • launchSettings.json

Just My Code

You can optionally disable justMyCode by setting it to "false". You should disable Just My Code when you are trying to debug into a library that you pulled down that doesn't have symbols or is optimized.

    "justMyCode":false

Just My Code is a set of features that makes it easier to focus on debugging your code by hiding some of the details of optimized libraries that you might be using, like the .NET Framework itself. The most important sub parts of this feature are --

  • User-unhandled exceptions: automatically stop the debugger just before exceptions are about to be caught by the framework
  • Just My Code stepping: when stepping, if framework code calls back to user code, automatically stop.

Availability

  • launch.json ✔️
  • settings.json ✔️ as csharp.debug.justMyCode
  • launchSettings.json

Require exact source

The debugger requires the pdb and source code to be exactly the same. To change this and disable the sources to be the same add:

    "requireExactSource": false

Availability

  • launch.json ✔️
  • settings.json ✔️ as csharp.debug.requireExactSource
  • launchSettings.json

Stepping into properties and operators

The debugger steps over properties and operators in managed code by default. In most cases, this provides a better debugging experience. To change this and enable stepping into properties or operators add:

    "enableStepFiltering": false

Availability

  • launch.json ✔️
  • settings.json ✔️ as csharp.debug.enableStepFiltering
  • launchSettings.json

Logging

You can optionally enable or disable messages that should be logged to the output window. The flags in the logging field are: 'exceptions', 'moduleLoad', 'programOutput', 'browserStdOut' and 'consoleUsageMessage'.

There are also advanced options under 'logging.diagnosticsLog' that are meant for diagnosing problems with the debugger.

Availability

  • launch.json ✔️
  • settings.json ✔️ under csharp.debug.logging
  • launchSettings.json

PipeTransport

If you need to have the debugger to connect to a remote computer using another executable to relay standard input and output between VS Code and the .NET Core debugger backend (vsdbg), then add the pipeTransport field following this schema:

    "pipeTransport": {
        "pipeProgram": "ssh",
        "pipeArgs": [ "-T", "ExampleAccount@ExampleTargetComputer" ],
        "debuggerPath": "~/vsdbg/vsdbg",
        "pipeCwd": "${workspaceFolder}",
        "quoteArgs": true
    }

More information about pipe transport can be found here.

You can find information on configuring pipe transport for Windows Subsystem for Linux (WSL) here.

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json

Operating system-specific configurations

If there are specific commands that need to be changed per operating system, you can use the fields: 'windows', 'osx', or 'linux'. You can replace any of the fields mentioned above for the specific operating system.

Suppress JIT Optimizations

The .NET Debugger supports the following option. If true, when an optimized module (.dll compiled in the Release configuration) loads in the target process, the debugger will ask the Just-In-Time compiler to generate code with optimizations disabled. The option defaults to false.

    "suppressJITOptimizations": true

How optimizations work in .NET: If you are trying to debug code, it is easier when that code is NOT optimized. This is because when code is optimized, the compiler and runtime will make changes to the emitted CPU code so that it runs faster, but has a less direct mapping to original source code. This means that debuggers are frequently unable to tell you the value of local variables, and code stepping and breakpoints might not work as you expect.

Normally the Release build configuration creates optimized code and the Debug build configuration does not. The Optimize MSBuild property controls whether the compiler is told to optimize code.

In the .NET ecosystem, code is turned from source to CPU instructions in a two-step process: first, the C# compiler converts the text you type in to an intermediate binary form called MSIL and writes this out to .dll files. Later, the .NET Runtime converts this MSIL to CPU instructions. Both steps can optimize to some degree, but the second step performed by the .NET Runtime performs the more significant optimizations.

What does the option do: This option controls what happens when a DLL that was compiled with optimizations enabled loads inside of the target process. If this option is false (the default value), then when the .NET Runtime compiles the MSIL code into CPU code, it leaves the optimizations enabled. If the option is true, then the debugger requests that optimizations be disabled.

When should you use this option: This option should be used when you have downloaded dlls from another source, such as a nuget package, and you want to debug the code in this DLL. In order for this to work you must also find the symbol (.pdb) file for this DLL.

If you are only interested in debugging code you are building locally, it is best to leave this option false, as, in some cases, enabling this option will significantly slow down debugging. There are two reasons for this slow down --

  • Optimized code runs faster. If you are turning off optimizations for lots of code the time can add up.
  • If you have Just My Code enabled, the debugger will not even try and load symbols for dlls that are optimized. Finding symbols can take a long time.

Limitations of this option: There are two situations where this option will NOT work:

1: In situations where you are attaching the debugger to an already running process, this option has no effect on modules that were already loaded at the time the debugger was attached.

2: This option has no effect on dlls that have been precompiled (ngen'ed) to native code. However, you can disable usage of pre-compiled code by starting the process with the environment variable COMPlus_ReadyToRun set to 0. If you are targeting an older version of .NET Core (2.x), also set COMPlus_ZapDisable set to '1'. If you are launching under the debugger, this configuration can be set by adding this setting to launch.json:

    "env": {
        "COMPlus_ZapDisable": "1",
        "COMPlus_ReadyToRun": "0"
    }

Availability

  • launch.json ✔️
  • settings.json ✔️ as csharp.debug.suppressJITOptimizations
  • launchSettings.json

Symbol Options

The symbolOptions element allows customization of how the debugger searches for symbols. Example:

    "symbolOptions": {
        "searchPaths": [
            "~/src/MyOtherProject/bin/debug",
            "https://my-companies-symbols-server"
        ],
        "searchMicrosoftSymbolServer": true,
        "searchNuGetOrgSymbolServer": true,
        "cachePath": "/symcache",
        "moduleFilter": {
            "mode": "loadAllButExcluded",
            "excludedModules": [ "DoNotLookForThisOne*.dll" ]
        }
    }

Properties

searchPaths: Array of symbol server URLs (example: https://msdl.microsoft.com/download/symbols) or directories (example: /build/symbols) to search for .pdb files. These directories will be searched in addition to the default locations, next to the module and the path where the .pdb was originally dropped to.

searchMicrosoftSymbolServer: If true the Microsoft Symbol server (https://msdl.microsoft.com/download/symbols) is added to the symbols search path. If unspecified, this option defaults to false.

searchNuGetOrgSymbolServer: If true the Nuget.org Symbol server (https://symbols.nuget.org/download/symbols) is added to the symbols search path. If unspecified, this option defaults to false.

cachePath": Directory where symbols downloaded from symbol servers should be cached. If unspecified, on Windows the debugger defaults to %TEMP%\\SymbolCache, and on Linux and macOS the debugger defaults to ~/.dotnet/symbolcache.

moduleFilter.mode: This value is either "loadAllButExcluded" or "loadOnlyIncluded". In "loadAllButExcluded" mode, the debugger loads symbols for all modules unless the module is in the 'excludedModules' array. In "loadOnlyIncluded" mode, the debugger will not attempt to load symbols for ANY module unless it is in the 'includedModules' array, or it is included through the 'includeSymbolsNextToModules' setting.

Properties for loadAllButExcluded mode

moduleFilter.excludedModules: Array of modules that the debugger should NOT load symbols for. Wildcards (example: MyCompany.*.dll) are supported.

Properties for loadOnlyIncluded mode

moduleFilter.includedModules: Array of modules that the debugger should load symbols for. Wildcards (example: MyCompany.*.dll) are supported.

moduleFilter.includeSymbolsNextToModules: If true, for any module NOT in the 'includedModules' array, the debugger will still check next to the module itself and the launching executable, but it will not check paths on the symbol search list. This option defaults to 'true'.

Availability

  • launch.json ✔️
  • settings.json ✔️ under csharp.debug.symbolOptions
  • launchSettings.json

Source Link is a feature that makes it so that when you are debugging code that was built on another computer, such as code coming from a nuget package, the debugger can automatically bring up matching source code by downloading it from the web. To make this work, the .pdb files for the code you are debugging contains data that maps the source files in the DLL to a URL that the debugger can download from. More information about Source Link can be found at https://aka.ms/SourceLinkSpec.

The sourceLinkOptions element in launch.json allows customization of Source Link behavior by URL. It is a map from URL to Source Link options for that URL. Wildcards are supported in the URL name. Currently the only customization is if Source Link is enabled for that URL, but more options may be added in the future.

Example:

    "sourceLinkOptions": {
        "https://raw.githubusercontent.com/*": { "enabled": true },
        "*": { "enabled": false }
    }

This example enables Source Link for GitHub URLs, and disables Source Link for all other URLs.

The default value of this option is to enable Source Link for all URLs. Similarly, Source Link is enabled for any URL that doesn't have a rule in the sourceLinkOptions map.

To disable Source Link for all URLs, use "sourceLinkOptions": { "*": { "enabled": false } }.

If multiple entries cover the same URL, the more specific entry (the entry with the longer string length) is used.

Currently Source Link only works for source files that can be accessed without authentication. So, for example, the debugger can download source files from open source projects on GitHub, but it cannot download from private GitHub repos, or from Visual Studio Team Services.

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json

Target Architecture options (macOS M1)

.NET on Apple M1 supports both x86_64 and ARM64. When debugging, the architecture of the process the debugger is attaching to and the debugger must match. If they do not match, it may result in Unknown Error: 0x80131c3c.

The extension tries to resolve targetArchitecture based on the output of dotnet --info in the PATH, else it tries to use the same architecture as VS Code.

You can override this behavior by setting targetArchitecture in your launch.json.

Example:

    "targetArchitecture": "arm64"

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json

Check for DevCert

This option controls if, on launch, the debugger should check if the computer has a self-signed HTTPS certificate used to develop web projects running on https endpoints. For this, it tries to run dotnet dev-certs https --check --trust, if no certs are found, it will prompt the user to suggest creating one. If approved by the user, the extension runs dotnet dev-certs https --trust to create a trusted self-signed certificate.

If unspecified, defaults to true when serverReadyAction is set. This option does nothing on Linux, VS Code remote, and VS Code for the Web scenarios.

You can override this behavior by setting checkForDevCert to false in your launch.json.

Example:

    "checkForDevCert": "false"

Availability

  • launch.json ✔️
  • settings.json
  • launchSettings.json ✔️ as useSSL

Configuring launchSettings.json

With C# Dev Kit, you can bring your launchSettings.json from Visual Studio to work with Visual Studio Code

Example:

{
  "iisSettings": {
    "windowsAuthentication": false,
    "anonymousAuthentication": true,
    "iisExpress": {
      "applicationUrl": "http://localhost:59481",
      "sslPort": 44308
    }
  },
  "profiles": {
    "EnvironmentsSample": {
      "commandName": "Project",
      "dotnetRunMessages": true,
      "launchBrowser": true,
      "applicationUrl": "https://localhost:7152;http://localhost:5105",
      "environmentVariables": {
        "ASPNETCORE_ENVIRONMENT": "Development"
      }
    },
    "EnvironmentsSample-Staging": {
      "commandName": "Project",
      "dotnetRunMessages": true,
      "launchBrowser": true,
      "applicationUrl": "https://localhost:7152;http://localhost:5105",
      "environmentVariables": {
        "ASPNETCORE_ENVIRONMENT": "Staging",
        "ASPNETCORE_DETAILEDERRORS": "1",
        "ASPNETCORE_SHUTDOWNTIMEOUTSECONDS": "3"
      }
    },
    "EnvironmentsSample-Production": {
      "commandName": "Project",
      "dotnetRunMessages": true,
      "launchBrowser": true,
      "applicationUrl": "https://localhost:7152;http://localhost:5105",
      "environmentVariables": {
        "ASPNETCORE_ENVIRONMENT": "Production"
      }
    },
    "IIS Express": {
      "commandName": "IISExpress",
      "launchBrowser": true,
      "environmentVariables": {
        "ASPNETCORE_ENVIRONMENT": "Development"
      }
    }
  }
}

Profile Properties

  • commandLineArgs - The arguments to pass to the target being run.
  • executablePath - An absolute or relative path to the executable.
  • workingDirectory - Sets the working directory of the command.
  • launchBrowser - Set to true if the browser should be launched.
  • applicationUrl - A semi-colon delimited list of URL(s) to configure for the web server.
  • sslPort - The SSL port to use for the web site.
  • httpPort - The HTTP port to use for the web site.

See Also